Mimosa A5x

Expand Your PTMP Network Effortlessly
The A5x is a compact and potent point-to-multipoint (PTMP) antenna designed for short to long-range pole and tower applications. The connectorized, 2×2 A5x is the ideal choice when the power and range of the 4×4 A5c access point are not required.

4.9-6.4 GHz | 700 Mbps | 20+ Km

Mimosa A5X

The Basics

700Mbps Max PTMP (IP) Throughput

2x2- Two-Port Connectorized

5.15–5.85 or 4.9–6.4GHz Extended Frequency

Max Throughput 700 Mbps (IP) PTMP Frequency 5150–5850 MHz FCC/ETSI/CA 4900–6400 MHz ROW
Weight 0.30 kg (0.70 lbs) IP Rating IP67
Power Consumption 9-12.9 W Connectors 2 (RP-SMA) (female)

A challenge has been locating the best access points that provide cost without sacrificing quality and performance. That changes with the A5x. It’s the best option for beginning a new network or increasing coverage since it yields a quicker return on investment.
Quite Quick
The A5x is a connectorized, 2×2 access point that lowers entry barriers and offers fiber-like speeds of up to 700 Mbps (IP).
INTERFERENCE
Get away from the clamor
The broad frequency of the A5x (4.9-6.4 GHz with the ROW product) will offer reasonably priced access to more low-noise spectrum for greater speeds and reliability—especially when combined with SRS (GPS sync) for channel reuse. New spectrum is becoming accessible in both 4.9 and 6 GHz.

PTMP at a Fraction of the Cost

DESIGN ultra-Rugged
The A5x is made to survive the worst outside environments thanks to its die-cast aluminum alloy backing.

Mimosa A5X

FAQs

In the United States (FCC), Europe (ETSI), and Canada, the A5x supports 5150-5850 MHz (CA). The A5x supports ROW frequencies between 4900 and 6400 MHz.

The majority of 2×2 third-party antennas and Mimosa’s N5-45×2 sector are compatible with the connectorized A5x.

The A5x is more affordable than the A5c, which makes it simpler to extend or launch a new network and get a quicker return on investment. The A5x is a fantastic alternative if the 4×4 beamforming capacity of the A5c is not required.

To benefit from SRS, the modular C5x and connectorized C5c operate best with the A5x access point (GPS sync).

Pre-order right away by clicking here, or just get in touch with the nearby distributor or reseller.

Being a 2×2 access point, the A5x lacks beamforming functionality. Anyone with an interest in beamforming need to research the 4×4 A5c.

An access point with a short to long range is the A5x. Each operator has a distinct method for estimating connection distance, which is influenced by a variety of external conditions, including the antenna being utilized. The Network Design Tool, which is free and relatively simple to use, can aid in presenting a better picture

Using an A5x without an antenna is not advised.